 |
The impact products using centrifugal separation. "PE" ultrafine filter precision filter and non-woven glass fiber filter layer precision three separate purification process.
First, the air pressure along the lower centrifugal filter into tangent impact separation some droplets along the wall into the trap smooth bottom of the large-sized liquid has been removed, the first stage separation bought : The second level for the purpose of compressed air to filter from the "PE" tube into the outer wall, some more than 3 μm solution Solid particles are effectively removed, was initially compressed air purification; Oil filter in addition to the third level, the filter elements from the non-woven, ultra-fine glass fiber Foam (layer) and the stainless steel support composed of compressed air mist, mist and the impact of fiberglass particles, produce molecules, and adhesion to glass fiber layer, where fiber mist spread overlapping points down. Gradually amalgamated into small droplets. The small gravity flow and air pressure, forcing it gradually through the fiber network, the final form droplets Poly. Arrived at the bottom of filters. As air from the inside outward flow velocity gradually declining, The outermost layer of foam body (layer) with the effective prevention of the formation of droplets of mist flow dispersion. Drop by drop so that the role of gravity filter at the bottom, discharged from the outfall, so as to achieve the purpose of oil removal filter.
Equipment parameter table
type |
KGL |
-0.1/1 |
-0.2/1 |
-0.4/1 |
-0.6/1 |
-1/1 |
-1.5/1 |
-2/1 |
-3/1 |
-4/1 |
-6/1 |
-10/1 |
-20/1 |
-30/1 |
-60/1 |
-100/1 |
Rated gas handling capacity （ Nm 3 /min ） |
0.1 |
0.2 |
4 |
6 |
1 |
1.5 |
2 |
3 |
4 |
6 |
10 |
20 |
30 |
60 |
100 |
Rated pressure （ Mpa ） |
0.7 |
Max work pressure （ Mpa ） |
1 |
Work temperature （℃） |
0~50 |
Filter Accuracy （ μ m ） |
≤ 0.1 |
Value of after the gas oil filter （ mg/m 3 ） |
≤ 0.1 |
Removal oil efficiency （ % ） |
≥ 99 |
Initial resistance
（ Mpa ）
|
≤ 0.01 |
Note ： Rated gas handling capacity of 0.7 Mpa under pressure to convert standard condition (20 ° C at atmospheric pressure), the volumes different pressure should be multiplied by the capacity of the pressure coefficient is given in Table K
Work pressure and pressure coefficient
Work pressure
（ Mpa ） |
0.1 |
0.1 |
0.1 |
0.1 |
0.1 |
0.1 |
0.1 |
0.1 |
0.1 |
0.1 |
Pressure coefficient
（ K ） |
0.25 |
0.25 |
0.25 |
0.25 |
0.25 |
0.25 |
0.25 |
0.25 |
0.25 |
0.25 |
Filter performance
work media |
Dry oil-free compressed gases |
Flux （ Nm 3 /min ） |
1.5 2 3 4 5 6 10 |
Filter Accuracy （ μ m ） |
0.1 |
Filtration efficiency （ % ） |
≥ 99.999999 |
Work pressure field （ Mpa ） |
0.5~1.0 |
Work temperature （℃） |
-25~100 |
Initial resistance （ Mpa ） |
≤ 0.04 |
|
