Product introduction ：
QDXL series pneumatic fiber membrane filter is our research and development new product 。 It composite fiber materials, after multiple carding, plate and tube heat treatment processing technology shaping filter 。 As the material selection process and a scientific and rational decision of the characteristics of the product. The six characteristics of the gas handling it as the latest generation of products.

1. Their mechanical strength and high heat-treated : fiber, cross-melting point sticky Roll Forming a burning process, determined that the overall structure of the mechanical strength, thickness 2mm filter specifications. HIP 0.4Mpa able to withstand an external pressure working conditions.
2. Cleanliness : high-fiber filter is formed between the melting sticky fiber itself without additives and adhesives used when no foreign body peeling Cleanliness detected by the Ministry of Aviation Test Center (JB420 -871A ) reached the 10th grade.
3. Monomer per square inch filter pore size ratio above 75%, through the power and gas flow. force small pressure loss (see figure), the gas flow is 1.8 times the powder burn.
4. Filter : high precision fiber preparation and grading of multiple procedures, the law creating the filter pore size and evenness. sophisticated filtering accuracy, had good results to aerosols 99.99%.
5. Chemical resistance : The filter fibers PE, PP is non-toxic and tasteless, the technique of melting viscosity, and the overall integration structure. acid, and good chemical resistance.
6. Metal prices below : the use of economic materials, low-cost light weight itself, do not use a shambles, and oil and is easily washed be used repeatedly. Broadening the application of the characteristics of the product, widely used in compressed air purification silencers, gas processing, aerodynamic components supporting food, Pharmaceutical Equipment dust filtration.