微滤膜复膜过滤器电镀过滤机气动纤维滤芯过滤芯天津市大东微滤膜科技有限公司

· Polytetrafluoroethylene (PTFE)
· PFM tube fiber membrane and components
· PE Tubular membrane components

>> PE Tubular membrane components

Product introduction ：
PE microporous membrane is ultrahigh molecular weight polyethylene pipe material, made of a specific tube micro-filtration membrane technology. Materials science, formulation and specific decisions high precision micro-membrane technology products, 6mm diameter tube diameter 10mm . Production may be required to decide upon the length .
The product has high mechanical strength, chemical stability of a strong acid, and corrosion-resistant bacteria such advantages. Joint using of backwash water pulsed gas will be able to conduct pH cleaning cleaning effect.

PE pipe microporous membrane nature and feature:

Project	Nature	Feature
Membrane Structures	Tubular membrane φ 10× φ 5mm L=1000~ 1600mm	Influent turbidity requirement, and less than 3500NTU, strong adaptability to the raw water quality, water turbidity stability Suspended particles with diameters less than 1.5nm crude requirements of the pre-treatment does not need complicated equipment.
Material	UHMWPE （ PE ）	Film prices are low, and life of eight years; Jinai, chlorine, potassium permanganate, strong oxidizing agents such as ozone. So combine chemical oxidation iron, and manganese; alkali resistant acid, the chemical cleaning and general acid; Anti-biological contamination ability, not biodegradable.
Pore size	0.2um~5um （ series product ）	Dealing with water quality, stability and change from the original water; Of suspended particles can stay closed, colloid, organic macromolecules, bacteria, and other microorganisms.
Mechanical Strength	Test pressure 12bar working pressure 0~1.8bar	High mechanical strength, tensile strength, use compressed air and water washing against a strong anti-wash thoroughly.
Permeability		At room temperature, permeability and stability more than two hours at 200L /m 。
Effluent quality	Technology integration microflocculation	turbidity≤ 0.5NTU, SDI ≤ 2, SS ≤ 1mg/L of bacteria Microbial removal of organic removal of the high rate of ≥ 99.9%; (40%-80%);